home *** CD-ROM | disk | FTP | other *** search
- NOTICE: The disk has experienced ^0 errors!
- (Check cabling,termination then run tests.)
-
- NOTICE: The disk has experienced ^0 errors!
- (Another ^1 were corrected with retries)
-
- WARNING: the disk has experienced some difficulty.
- ^1 transfers were corrected with retries.
-
- Cartridge is write protected. Can’t deal with a read only device.
-
- SORRY, this option is not implemented yet!
-
- NOTE: You must exit Silverlining and reboot your Mac to run the updated driver.
-
- About to set loops for a different Mac processor.
- These loops can’t be tested.
-
- NOTICE: media appears to need formatting.
- (This may take some time!)
-
- Selected data transfer loops caused errors.
- Use the following dialog to select loops.
-
- Drive appears to require formatting. This will destroy all data. OK to continue?§Cancel§Format
-
- Format returned an error! Try and use the drive anyway?§Yes§No
-
- Do you want to force Silverlining to Scavenge for volumes?§Scavenge
-
- SORRY - No free blocks to install new driver.
-
- Sorry, no blocks reserved for testing.
-
- Insufficient blocks to create a new volume.
- (Make another volume smaller first.)
-
- Not a Mac Volume, resizing will lose all data in partition. Are you sure you want to do this?§Resize
-
- Unused
-
- Sorry, can’t convert a drive that Silverlining took over.
-
- Sorry, can’t convert drives joined by Silverlining.
-
- Sorry, old partition info seems invalid, can’t take over.
-
- Sorry can’t shrink any volume as required.
- Please optimize a volume first.
-
- No room for disk driver in system tables.
-
- Current operating system does not allow Silverlining to access SCSI resources.
-
- Failed to install driver!
-
-